PoE Solid-State LiDAR

U-FTX

PoE Solid-State LiDAR

From automotive complexity
to industrial simplicity.

U-FTX transforms the Hesai FTX into a plug-and-play industrial LiDAR with standard Ethernet and PoE+, eliminating automotive complexity and enabling fast, scalable deployment.

It combines the performance of Hesai's solid-state LiDAR with a fully industrialized interface, enabling engineers to deploy high-quality 3D perception systems without proprietary connectors, separate power wiring, or automotive integration overhead.

Ursa-Dynamics U-FTX
Fully Solid-State No Moving Parts
20–60 m @10% Ranging Capability
PoE+ Single cable for power + data
100BASE-TX Standard Ethernet
IP67 Industrial housing
<6W Ultra-low power consumption

Built for compact perception systems in the field

U-FTX is intended for compact robotics, fixed monitoring points, and industrial edge systems that need near-field 3D perception without the integration burden of an automotive sensor stack.

In practice, it fits into deployments where one Ethernet run, low power draw, environmental sealing, and predictable mechanical packaging matter more than custom wiring harnesses or vehicle-specific electronics.

Key Differentiators

Industrial interface, simple wiring, and fast deployment for engineering teams.

No Automotive Connectors

U-FTX replaces automotive connector complexity with an industrial M12 X-coded Ethernet interface.

Single-Cable PoE+

Power and data run through one standard Ethernet cable using PoE+ (IEEE 802.3at).

IP67 Industrial Housing

Aluminium ADC12 housing protects the LiDAR for demanding robotics, infrastructure, and industrial deployments.

Plug-and-Play Deployment

Standard Ethernet, low power consumption, and industrial enclosure design reduce system overhead and deployment time.

Made in Austria

Engineered and assembled in Europe for industrial deployment quality.

Technical Specifications

PoE solid-state LiDAR built from an industrialized Hesai FTX architecture.

Power & Network

Power Consumption <6 W
Power Supply PoE+ IEEE 802.3at, up to 30W
Network 100BASE-TX IEEE 802.3u

Mechanical

Dimensions 65.1 × 62.8 × 66.7 mm
Weight ~420 g
Housing Material Aluminium ADC12
Protection Rating IP67
Connector M12 X-coded industrial Ethernet

Environmental

Operating Temperature -40°C to +85°C
Sensor Core Hesai FTX solid-state LiDAR
Interface Layer PoE+, Ethernet conversion, industrial enclosure

Field of View Options

Three horizontal FoV variants with 105° vertical FoV coverage.

Wide

180° H × 105° V @ 20 m

Point Rate up to 430,000 pts/s
Ranging Accuracy ±5 cm (typical)
Ranging Precision 3 cm (1σ)
Angular Resolution 0.62° finest
Pixel Resolution 216 (H) × 192 (V)
Scanning Frequency 10 Hz

Standard

140° H × 105° V @ 30 m

Point Rate up to 492,000 pts/s
Ranging Accuracy ±5 cm (typical)
Ranging Precision 3 cm (1σ)
Angular Resolution 0.56° (H) × 0.56° (V)
Pixel Resolution 256 (H) × 192 (V)
Scanning Frequency 10 Hz

Long Range

60° H × 45° V @ 60 m

Point Rate 491,500 pts/s
Ranging Accuracy ±3 cm (typical)
Ranging Precision 3 cm (1σ)
Angular Resolution 0.234° × 0.234°
Pixel Resolution 256 (H) × 192 (V)
Scanning Frequency 10 Hz

U-FTX vs Automotive LiDAR

Same sensing foundation, simpler industrial deployment.

Traditional Automotive LiDAR Issues

  • Proprietary connectors
  • Separate power + data wiring
  • Complex integration
  • High system overhead

U-FTX Approach

  • Standard Ethernet interface
  • PoE+ single-cable setup
  • Fast deployment
  • Reduced system complexity

Impact

  • Lower wiring complexity
  • Shorter deployment time
  • Lower integration cost
  • Scalable rollout across fleets

Use Cases

Unlock next-generation perception across industries

Mobile Robotics & AMRs

Enable autonomous mobile robots with precise 180° side coverage for warehouse navigation, logistics automation, and last-mile delivery. The solid-state design handles continuous operation without maintenance, while the wide FOV ensures safe corridor traversal and dynamic obstacle avoidance.

Perimeter Security & Intrusion Detection

Deploy along fences, walls, and building perimeters to create invisible 3D detection zones. The FTX operates in complete darkness and adverse weather, detecting intruders, vehicles, or drones with millimeter precision. Ideal for data centers, critical infrastructure, and high-security facilities.

Industrial Inspection & Quality Control

Mount on robotic arms or gantry systems for automated surface inspection, dimensional verification, and defect detection. The 30m range and high angular resolution capture fine details on production lines, conveyor systems, and assembly stations without stopping operations.

AGVs & Forklift Automation

Transform forklifts and AGVs with blind spot elimination and pedestrian safety systems. The 180° coverage detects workers, obstacles, and other vehicles approaching from the side during tight warehouse maneuvers, pallet handling, and loading dock operations.

Drone & UAV Navigation

Lightweight design and low power consumption make the FTX ideal for drone obstacle avoidance and terrain following. Enable autonomous inspection flights around infrastructure, power lines, and construction sites with reliable collision prevention in GPS-denied environments.

Smart Access Control & People Counting

Deploy at entrances, turnstiles, and access points for GDPR-compliant occupancy monitoring. Track foot traffic, detect tailgating, and manage crowd flow without capturing personal images—perfect for retail analytics, event venues, and smart building management.

Be First to Evaluate U-FTX

Join the early-adopter list to receive launch details, integration updates, and exclusive pricing information as soon as it becomes available.